Wrapper → G-code

Single file — save this page and open it in Chrome or Edge. Compute a saddle, paste a Bend-Tech wrapper table, or import a DXF. Everything is converted to millimetres, then MASSO rotary G-code is emitted (G21, A in degrees, Y in mm). Zero the seam at A0 Y0. The cut starts at the deepest point, closed loop, pierce dwell, retract Z.

Name of cut

G-code is always G21 millimetres.
Defaults to half the wall.

Source

Parent pipe it saddles onto

Auto uses stand-on when the parent is smaller than the cut radius.
One point per line. Comma, tab or space separated. First column = distance around the tube circumference, second = axial offset. Order does not matter — it gets sorted. Column 1 in degrees is auto-detected if the span is ~360°.
Drop a DXF here or click to pick a file.
Text, labels, page border and background fill are dropped. The closed notch cut is converted to the wrapper table.

Cut settings

T112 plasma. Do not use T111.

Profile

Circumference span—
Axial depth—
Points—
Profile—
Orange = cut profile (axial offset vs angle). Seam sits at A0. The pierce is the deepest point.

G-code